Calculadora: Livros em capa dura

As sangrias são as áreas impressas da folha que se estendem para além do limite da publicação planeada e que serão cortadas durante o processamento da impressão. O formato líquido do bloco é igual ao formato que se pretende obter. O formato bruto do bloco é o formato antes do corte, ou seja, antes de as sangrias serem removidas.

O bloco interior sem sangrias é quando nenhum objeto do desenho será impresso na margem da folha.

A opção foi projetada para imprimir livros com muitos gráficos difíceis e para impressões pequenas e muito pequenas. Adequado para todos os tipos de gráficos, especialmente desejável para trabalhos difíceis, com muitas ilustrações, sólidos de área grande, etc. Impressão de alta densidade, cores muito pretas e mais escuras do que na impressão offset. As bordas da marca observadas pelo microscópio são muito afiadas. É adequado para imprimir em todos os papéis que usamos a partir de 70 g / m².

O trabalho contém principalmente texto, gráficos e tabelas. As fotos simples e pequenas também são aceitáveis. A opção também se aplica a 2 + 2 trabalhos impressos (da paleta CMYK). Cobertura total com cores até 20% contadas dentro do formato ordenado.

The window is cut into the cover after the block is cased in. Its preparation involves making a hole in the covering, base case and endpaper. The window may be located at the front or back of the book and may take a round or rectangular shape.

They can be cut at an angle or standard. In the first case, the cutting tool is angled at 45 degrees to the cover and in the second, at 90 degrees.

When designing, consider the tolerance of object matching between the covering and endpaper, which can be up to 2 mm. Avoid, for example, lines that would have their continuation on the part of the endpaper visible in the die-cut window.

The safety limits are 25 mm from the edge of the base case at the spine side and 10 mm each for the other edges. Indicate the die-cut window's shape and location by preparing the mask as for the UV varnish.

Choose the binding board that becomes visible on the edges of the die-cut window – available types: standard (grey) and black (dyed).

We only cut out the window in board with a thickness of 2 mm.

Choose the binding board that becomes visible on the edges of the die-cut window – available types: standard (grey) and black (dyed).

We only cut out the window in board with a thickness of 2 mm.

The die-cut windows are made either at a standard or an angle.

In the first case, the cutting tool is angled at 90 degrees to the cover and in the second, at 45 degrees. The windows can take a round or rectangular shape.

The safety limits are 25 mm from the edge of the base case at the spine side and 10 mm each for the other edges. Indicate the die-cut window's shape and location by preparing the mask as for the UV varnish.

Mark "None" if your project has no die-cut window on the front cover.

The die-cut windows are made either at a standard or an angle.

In the first case, the cutting tool is angled at 90 degrees to the cover and in the second, at 45 degrees. The windows can take a round or rectangular shape.

The safety limits are 25 mm from the edge of the base case at the spine side and 10 mm each for the other edges. Indicate the die-cut window's shape and location by preparing the mask as for the UV varnish.

Mark "None" if your project has no die-cut window on the back cover.

Block edge printing is done in CMYK with pigment inks.

Prepare the design in three PDF files per the rule: one PDF is one surface. Remember to include 3 mm bleeds and an offset tolerance of up to 1 mm between the cover and the printed edge.

Wrap graphics around the entire book, give an impressive position to the typography or extend the illustration from the cover. Edge printing is a fascinating and unconventional solution that thrills readers.